Framing, Sheetrock & Trim Done Clean

The trades that make a remodel look professional

Framing and sheetrock are the parts of a project nobody photographs, and they decide everything about how the finished work reads. A wall that is framed out of plumb telegraphs through every cabinet and countertop that touches it. A drywall patch with mismatched texture catches light and eyes for the life of the house. Trim with open miters cheapens a room no matter what the paint cost. Garcia's Construction treats these as the precision trades they are, because on the card and in practice, sheetrock, trim and framing are the backbone of what we do.

These trades also carry the everyday repairs that West Houston homes accumulate. Clay soils west of the city swell and shrink with the seasons, flexing foundations just enough to crack drywall above doorways and along ceiling joints. Roof and plumbing leaks stain ceilings and soften walls. A garage gets converted, an office needs a wall, a builder-grade living room wants crown molding. This is steady, familiar work for us, done with drop cloths down and dust control up, whether it is a two-hour patch or a month-long build-out.

Framing and room conversions

We frame new interior walls, remove walls where an engineer or inspection confirms they are not load-bearing, and open up cased passages between kitchen and living areas, the single most requested layout change in this area's 1990s and 2000s floor plans. Garage conversions, closet additions that turn a study into a legal bedroom, and media or utility room build-outs all start with straight, square framing and end with finishes that match the rest of the house.

Sheetrock: hang, tape, float, texture

New installs get hung tight with staggered seams, taped and floated flat, then textured to match the house so additions do not look added. Repairs get cut back to solid material, backed properly, and feathered wide so the patch vanishes. Water-damaged ceilings are opened up, dried and inspected before anything gets closed, because sealing moisture into a cavity is how you buy a mold problem. We would rather do it once, correctly.

Trim and finish carpentry

Baseboards, door and window casing, crown molding and wainscoting are the jewelry of a room, and they are cut and fit by hand on walls that are never as square as the lumber. Tight miters, scribed fits, filled nail holes and clean caulk lines are the standard, followed by paint that makes the trim look like it grew there. If we are painting the room anyway, the trim and walls are finished as one job.